Seal Kit · VOLVO

VOE14589153

BORISE PART TYPE
Part TypeVOE14589153
OEM Part Number47396115
ProductSeal Kit
EquipmentVOLVO
Request a Quotation → ← Back to Part Type Catalog
BORISE seal kit VOE14589153 (part no. 47396115)
Actual product photo · OEM part no. 47396115 · BORISE part type VOE14589153
Part Number Identification

47396115 — VOE14589153 Cross-Reference

OEM part number 47396115 is catalogued by BORISE as part type VOE14589153, a complete hydraulic seal kit for Volvo equipment. Both numbers refer to the same kit — use either one when requesting a quotation.

OEM Part Number47396115
BORISE Part TypeVOE14589153
Product CategoryHydraulic seal kit (complete repair kit)
Equipment MakeVOLVO
ManufacturerHangzhou Chenlin Sealing Technology Co., Ltd. (BORISE)
Product PhotoActual kit photograph shown above — OEM 47396115
AvailabilityManufactured to order — request a quotation
Reference Pagehttps://borise-seal.com/seal-kits/voe14589153/
Materials & Performance

Technical Reference for Seal Kit 47396115

BORISE seal kits are built with the same high-performance polyurethane systems used across our sealing range. The figures below describe BORISE material capability; the exact kit configuration follows the OEM part type VOE14589153.

Material SystemPPDI / PHDI / MDI polyurethane (BORISE B6000 grade)
Typical Hardness90 Shore A (polyurethane O-rings)
Temperature CapabilityUp to 130 °C for PPDI O-rings
Pressure Range30–70 MPa; 25–32 MPa without a backup ring
Wear Resistance3–10× conventional NBR seals
Service Life2–3× conventional sealing materials
Quality SystemISO 9001 certified; 15 patents
Export MarketsUnited States, Europe, Middle East, Southeast Asia

Material values are BORISE laboratory references for our polyurethane systems, not a certified test result for this individual kit. Contact us for kit-specific drawings and material data sheets.

Typical Applications

Where Seal Kit VOE14589153 Is Used

Part type VOE14589153 (OEM 47396115) is catalogued under Volvo. BORISE hydraulic seal kits are supplied for cylinder, motor and valve circuits on excavators, hydraulic breakers and heavy equipment.

Common sealing positions

Precision Sealing, Zero Leakage

Polyurethane sealing elements engineered for extreme-duty hydraulic power transmission, with tight dimensional control across every kit.

OEM / ODM Support

Custom kit configurations, private labelling and drawing-based production available for distributors and equipment service networks.

Fitment Confirmation

Send the machine model, serial number and the OEM part number 47396115 — we verify the kit contents before you order.

Volvo Part Numbers

Related OEM Numbers for Volvo

Other BORISE seal kits catalogued under Volvo. Click any OEM part number to open its specification page.

Questions & Ordering

Seal Kit 47396115 — FAQ

Is OEM part number 47396115 the same as BORISE part type VOE14589153?

Yes — both identifiers point to the same seal kit in the BORISE catalog. 47396115 is the OEM part number; VOE14589153 is the BORISE part type. Quote either number and we will confirm the kit contents before ordering.

What equipment is seal kit 47396115 used on?

This kit is catalogued under VOLVO. Hydraulic seal kits cover boom, arm, bucket, swing motor, travel motor, control valve, hydraulic pump and center-joint circuits. Send us the machine model and serial number to confirm fitment.

How do I order BORISE part type VOE14589153?

Request a quotation with the part number, quantity and destination. BORISE manufactures to order under ISO 9001, supports OEM/ODM requirements, and serves customers in the United States, Europe, the Middle East and Southeast Asia.

What is included in a hydraulic cylinder seal kit like 47396115?

A complete cylinder repair kit is a matched set of dynamic and static seals — typically a rod seal, piston seal, wiper / dust seal, buffer seal, O-rings, backup rings and guide rings or wear bands. The exact contents depend on the cylinder drawing, so we confirm the itemised kit list against OEM part number 47396115 before an order is placed.

How do I verify fitment for OEM part number 47396115?

Send the machine model, serial number, cylinder position (boom, arm, bucket, swing, travel, center joint or pump), and the full OEM part number. If the number is worn off, measure the bore diameter, rod diameter, seal cross-section and groove dimensions, or send the old seals and a drawing or sample. We check the profile and compound before confirming the replacement.

Can I order part type VOE14589153 by drawing or sample?

Yes. BORISE produces custom and drawing-based seal kits for distributors and repair workshops. Send the old seal set, a photo of the groove, or the dimensions, and our engineers will match the profile, material and tolerance for a quotation.

Looking for a different number? The part number index lists all 97 BORISE seal kits with OEM numbers, part types and product photos.

Part Number Lookup

How Buyers Search for Seal Kit VOE14589153

Buyers looking for an OEM part number cross-reference, a cylinder repair kit or an aftermarket replacement seal kit spell the same reference in several ways. These are the common search spellings for 47396115 / VOE14589153.

OEM part number47396115 — VOE-prefixed OEM reference
BORISE part typeVOE14589153
Part number variantsVOE14589153VOE 14589153
Search by number47396115OEM 47396115Part No. 4739611547396115 seal kit
Equipment makeVOLVO — Volvo excavator seal kit
Catalogue entryBORISE part number index

Related search terms

Part numbers are used as catalogue identifiers, not as a fitment guarantee. A number stamped on an individual seal may identify the seal maker, material or size rather than the complete service kit — confirm the assembly before ordering.

Kit Contents & Terminology

What Is in a Hydraulic Cylinder Seal Kit? — 47396115

A complete seal kit (also called an overhaul kit, rebuild kit or reseal kit) is a matched set, not a bag of interchangeable rings. Replacing every element at once keeps compound consistency and seal cross-sections identical across the cylinder, which is why a kit is specified rather than individual spare seals.

Typical sealing components

Material & compound terms

PTFE composite, compound consistency, wear resistance, mineral hydraulic oil. Material choice follows working pressure, fluid type and temperature — confirm the compound against the cylinder drawing.

Measurements used to identify a kit

seal profile, drawing or sample, rod diameter, outside diameter (OD). These are the dimensions a workshop records when the OEM number is no longer legible.

Hydraulic circuit positions

main hydraulic pump, hydraulic breaker, arm / stick cylinder, swing motor, center joint. One machine can use several different cylinders, so the position matters as much as the model.

This is general hydraulic sealing terminology, not an itemised contents list for kit 47396115. Kit contents vary by cylinder design and serial-number break; request the drawing or an itemised list before installation.

Fitment & Troubleshooting

Fitment Check & Common Seal Failure Symptoms — VOE14589153

The fastest route to an exact-fit replacement is the complete OEM part number plus the machine serial number and cylinder position. Where documentation is missing, a workshop measures the bore, rod and groove and matches the old seal profiles.

What to send for verification

Machine model and serial number (PIN), cylinder position, full OEM number 47396115, and photos of the machine plate, cylinder and old seal arrangement. Note any production break or a replacement cylinder fitted during a previous overhaul.

Reseal or replace?

When the rod and bore are undamaged, a matched repair kit restores sealing at a fraction of a new cylinder. Verify seal profile and drawing or sample before ordering, and relieve stored pressure before opening any hydraulic component.

Symptoms and search terms that lead to a reseal

External oil on the rod usually points to the rod seal; a loaded boom that drifts down with a dry cylinder indicates internal bypass past the piston seal. Both are reasons to fit a complete kit rather than a single seal.

Scroll to Top