OEM part number 47382874 is catalogued by BORISE as part type 7135557, a complete hydraulic seal kit for Cummins and other equipment equipment. Both numbers refer to the same kit — use either one when requesting a quotation.
| OEM Part Number | 47382874 |
|---|---|
| BORISE Part Type | 7135557 |
| Product Category | Hydraulic seal kit (complete repair kit) |
| Equipment Make | CUMMINS / OTHER |
| Manufacturer | Hangzhou Chenlin Sealing Technology Co., Ltd. (BORISE) |
| Product Photo | Actual kit photograph shown above — OEM 47382874 |
| Availability | Manufactured to order — request a quotation |
| Reference Page | https://borise-seal.com/seal-kits/7135557/ |
BORISE seal kits are built with the same high-performance polyurethane systems used across our sealing range. The figures below describe BORISE material capability; the exact kit configuration follows the OEM part type 7135557.
| Material System | PPDI / PHDI / MDI polyurethane (BORISE B6000 grade) |
|---|---|
| Typical Hardness | 90 Shore A (polyurethane O-rings) |
| Temperature Capability | Up to 130 °C for PPDI O-rings |
| Pressure Range | 30–70 MPa; 25–32 MPa without a backup ring |
| Wear Resistance | 3–10× conventional NBR seals |
| Service Life | 2–3× conventional sealing materials |
| Quality System | ISO 9001 certified; 15 patents |
| Export Markets | United States, Europe, Middle East, Southeast Asia |
Material values are BORISE laboratory references for our polyurethane systems, not a certified test result for this individual kit. Contact us for kit-specific drawings and material data sheets.
Part type 7135557 (OEM 47382874) is catalogued under Cummins and other equipment. BORISE hydraulic seal kits are supplied for cylinder, motor and valve circuits on excavators, hydraulic breakers and heavy equipment.
Polyurethane sealing elements engineered for extreme-duty hydraulic power transmission, with tight dimensional control across every kit.
Custom kit configurations, private labelling and drawing-based production available for distributors and equipment service networks.
Send the machine model, serial number and the OEM part number 47382874 — we verify the kit contents before you order.
Other BORISE seal kits catalogued under Cummins and other equipment. Click any OEM part number to open its specification page.
Yes — both identifiers point to the same seal kit in the BORISE catalog. 47382874 is the OEM part number; 7135557 is the BORISE part type. Quote either number and we will confirm the kit contents before ordering.
This kit is catalogued under CUMMINS / OTHER. Hydraulic seal kits cover boom, arm, bucket, swing motor, travel motor, control valve, hydraulic pump and center-joint circuits. Send us the machine model and serial number to confirm fitment.
Request a quotation with the part number, quantity and destination. BORISE manufactures to order under ISO 9001, supports OEM/ODM requirements, and serves customers in the United States, Europe, the Middle East and Southeast Asia.
A complete cylinder repair kit is a matched set of dynamic and static seals — typically a rod seal, piston seal, wiper / dust seal, buffer seal, O-rings, backup rings and guide rings or wear bands. The exact contents depend on the cylinder drawing, so we confirm the itemised kit list against OEM part number 47382874 before an order is placed.
Send the machine model, serial number, cylinder position (boom, arm, bucket, swing, travel, center joint or pump), and the full OEM part number. If the number is worn off, measure the bore diameter, rod diameter, seal cross-section and groove dimensions, or send the old seals and a drawing or sample. We check the profile and compound before confirming the replacement.
Yes. BORISE produces custom and drawing-based seal kits for distributors and repair workshops. Send the old seal set, a photo of the groove, or the dimensions, and our engineers will match the profile, material and tolerance for a quotation.
Looking for a different number? The part number index lists all 97 BORISE seal kits with OEM numbers, part types and product photos.
Buyers looking for an OEM part number cross-reference, a cylinder repair kit or an aftermarket replacement seal kit spell the same reference in several ways. These are the common search spellings for 47382874 / 7135557.
| OEM part number | 47382874 — straight numeric OEM reference |
|---|---|
| BORISE part type | 7135557 |
| Part number variants | 7135557 |
| Search by number | 47382874OEM 47382874Part No. 4738287447382874 seal kit |
| Equipment make | CUMMINS / OTHER — industrial seal kit |
| Catalogue entry | BORISE part number index |
Part numbers are used as catalogue identifiers, not as a fitment guarantee. A number stamped on an individual seal may identify the seal maker, material or size rather than the complete service kit — confirm the assembly before ordering.
A complete seal kit (also called an overhaul kit, rebuild kit or reseal kit) is a matched set, not a bag of interchangeable rings. Replacing every element at once keeps compound consistency and seal cross-sections identical across the cylinder, which is why a kit is specified rather than individual spare seals.
Shore A hardness, extrusion resistance, compression set, low-temperature flexibility. Material choice follows working pressure, fluid type and temperature — confirm the compound against the cylinder drawing.
rod diameter, outside diameter (OD), groove dimensions, seal profile. These are the dimensions a workshop records when the OEM number is no longer legible.
arm / stick cylinder, swing motor, center joint, main hydraulic pump, hydraulic breaker. One machine can use several different cylinders, so the position matters as much as the model.
This is general hydraulic sealing terminology, not an itemised contents list for kit 47382874. Kit contents vary by cylinder design and serial-number break; request the drawing or an itemised list before installation.
The fastest route to an exact-fit replacement is the complete OEM part number plus the machine serial number and cylinder position. Where documentation is missing, a workshop measures the bore, rod and groove and matches the old seal profiles.
Machine model and serial number (PIN), cylinder position, full OEM number 47382874, and photos of the machine plate, cylinder and old seal arrangement. Note any production break or a replacement cylinder fitted during a previous overhaul.
When the rod and bore are undamaged, a matched repair kit restores sealing at a fraction of a new cylinder. Verify rod diameter and outside diameter (OD) before ordering, and relieve stored pressure before opening any hydraulic component.
External oil on the rod usually points to the rod seal; a loaded boom that drifts down with a dry cylinder indicates internal bypass past the piston seal. Both are reasons to fit a complete kit rather than a single seal.